Utvecklingen av Sublimering Blanks Printing av Christine Cora

This is primarily transferring a picture to material from a paper carrier.

once heat and pressure area unit applied to the transfer paper the inks

area unit transferred. Some transfers area unit topical, and also the image

sits on the surface of the material. alternative transfers area unit absorbed

into the fibres of the material. Heat transfer printing is clean and

environmentally safe. the sole by-product is that the paper carrier. it's the

proper print technique for brief run and sample production, however can

even be used for batch production additionally.

Dye sublimation permits pic science laboratory quality image printing.

throughout the dye sublimation printing, a picture is digitally written in

reverse with dye sublimation toners or inks onto media. That image is then

placed on prime of a cloth and subjected to high heat and pressure to make

a heat press. The dye sublimation toners or inks sublimate – the inks go

from a solid state to a aerosolized state while not turning into liquid in

between and flow into the material, colouring the threads. This creates a

mild gradation of color and doesn't distort or fade over time.

Discharge printing is one technique of resist printing and involves

employing a chemical pastereferred to as a disperse dye. It should be used

with a ‘reactive dye’ as a ground color for the method to figure. It

conjointly must be ‘cured’ or fastened with steam therefore the dye reacts

with the material and causes a color reaction. Discharge printing produces

the brightest, lightest prints on dark-colored clothes and might be terribly

putting. This technique will solely be used on natural fibres and materials

that may discharge color. Another technique of resist printing is Batik.

Natural materials like cotton or silk area unit used as they absorb the wax

that's applied within the dye resisting method. The materials should be of

a high thread count for best results.

After the wax has been applied, the material is prepared for the dye tub.

these days most batik factories use giant concrete vats, higher than the

vats area unit ropes with pulleys that the material is draped over once it's

been lordotic into the dye tub. the quantity of your time it's left within the

tub determines the hue of the colour.

For more information ,click here: